RTL8723 WiFi and Bluetooth Integrated Module Support 802.11b G N and Bluetooth 4.0 Dual Mode(BW122)

RTL8723 WiFi and Bluetooth Integrated Module Support 802.11b G N and Bluetooth 4.0 Dual Mode(BW122)
FSC-BW122 Datasheet:
Product Details:

FSC-BW122 Datasheet:

Specification

Model

FSC-BW122

Chipset

RTL8723BU

Interface Type

USB2.0,PCM

Product Size(L*W*H)

12*13.4*1.6mm,Tolerance: +/-0.2mm

Power Supply

DC3.3V (±5%), 300Ma (Max)

Standards

WiFi: IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
BT: V2.1+EDR/BT V3.0/BT V3.0+HS/BT V4.0

Frequency Range

2.4~2.4835GHZ

Modulation Types

WiFi: 802.11b: CCK,DQPSK,DBPSK;
802.11g/n: 64-QAM,16-QAM,QPSK,BPSK
BT: 8DPSK,π/4 DQPSK,GFSK

Working Mode

Infrastructure ,Ad-Hoc

Data Transfer Rates

WiFi:802.11b: 11,5.5,2,1 Mbps;802.11g:  54,48,36,24,18,12,9,6 Mbps
802.11n:150Mbps (Max)
BT: 1Mbps for Basic Rate;2,3 Mbps for Enhanced Data  Rate

Sensitivity @PER

WiFi: 11M:-86dBm@8%PER,54M: -74dBm@10%PER 135M:  -68dBm@10% PER (Tolerance : ±2dB)
BT:-89dBm@1Mbps,-85dBm@2Mbps,-83dBm@3Mbps (Tolerance :  ±2dB)

RF Power

WiFi: 16dBm@11b,14dBm@11g,13dBm@11n (Tolerance : ±2dB)
BT: +5.5~+10.5dBm for Class 1.5 output power

Antenna Type

Connect to the external antenna through the half hole

Operating Temperature

Working Temperature: -10℃~50℃
Storage Temperature: -40℃~70℃


FSC-BW112 is a small size and low profile of WiFi + BT Combo module with LGA (Land-Grid Array) footprint, board size is 13.2mm*12.0mm with module thickness of 2mm. It can be easily manufactured on SMT process and highly suitable for tablet PC, ultra book, mobile device and consumer products. It provides USB interface for WiFi to connect with host processor and high speed USB interface for BT. It also has a PCM interface for audio data transmission with direct link to external audio codec via BT controller. The WiFi throughput can go up to 150Mbps in theory by using 1x1 802.11n b/g/n MIMO technology and Bluetooth can support BT2.1+EDR/BT3.0 and BT4.0.
  
 Features
 
 Operate at ISM frequency bands (2.4GHz)
 USB for WiFi and Bluetooth
 IEEE standards support: IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.11d,IEEE 802.11e,IEEE 802.11h,IEEE 802.11i .
 Fully Qualified for Bluetooth 2.1+EDR specification including both 2Mbps and 3Mbps modulation mode
 Fully qualified for BIuetooth 3.0
 Fully qualified for BIuetooth 4.0 Dual mode
 Full–speed Bluetooth operation with Piconet and Scatternet support
 Enterprise level security which can apply WPA/WPA2 certification for WiFi.
 WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150 Mbps upstream PHY rate
  
 Application
  
 Health & Medical devices
 Wireless POS
 Measurement and monitoring systems
 Industrial sensors and controls
 Asset tracking
  
  PIN Definition Descriptions
  

Pin

Pin Name

Pin Descriptions

1

3.3V

Main power voltage source input

2

DM

USB -

3

DP

USB +

4

GND

Ground

5

GND

Ground

6

RF0

RF/BT output

7

RF1

Floating (NC)

8

CLK

Floating (NC)

9

PCM_IN

PCM Control input

10

PCM_OUT

PCM Control output

11

PCM_SYNC

SYNC signal

12

PCM_CLK

PCM crystal

13

WOWLAN

Chip wakeup host pin
     (When not used wake up, it is default idle.)

14

SUSPEND

Host wakeup chip pin (When not used PCM, it is default idle.)

 

Total 14Pins

13.0*12.2*2.0mm Package

 
   
    图片5_副本.jpg

 
 FAQ:
  
 Q1. Do you have any MOQ limit for an order?
 No MOQ Limit, we welcome any client to purchase the sample for test purpose.
  
 Q2: How to proceed an order?
 Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, customer confirms the samples and pay deposit for the official order. Finally, we arrange the production and shipping.  
  
 Q3: Do you accept Alibaba online orders?
 Sure! We prefer to fulfill orders under Alibaba Trade Assurance system, since both parties will be protected.
   
 Q4: Do you provide samples? Is it free or extra?
 No, we are not offer the free sample, however once the order confirmed after sample approval, we will return the sample cost to you.
  
  
 Company Introduction:
  

Feasycom focus on the researching and developing of IoT (internet of things) products, including Bluetooth Modules, WiFi and LoRa Modules, Bluetooth Beacon, etc. With more than 10-year experiences in the wireless connectivity, which ensure us have the capability for providing low-risk product development, reducing system integration cost and shortening product customization cycle to thousands of diverse customer worldwide.

 

Feasycom’s engineering and design services include:

 

SDK

APP Support

PCB Design

Development Board

Firmware Development

Depth Customization

Certification Request

Turn-Key Production Testing & Manufacturing

 

Our products and services mainly apply to Automotive, Point of Sale, Home Automation, Healthcare and Engineering, Banking, Computing, Vending Business, Location, Lighting and more.

 

Aiming at “Make Communication Easy and Freely”, Feasycom is dedicated to design and develop high-quality products, efficient services to customers, for today, and all days to come.

   图片1.jpg 
 图片2.jpg 
 
 
   
  Packaging & Shipping
  
 1.Material delivery will be arranged by DHL/UPS/Fedex/TNT/EMS,normally it will take 3-7 working days 
 to arrive in most of the countries.
  
 2.We can also help you ship the goods by air line, then you fetch the packet from your local airport ,normally it takes about 2-7 days.
    图片3.jpg

If you're interested in the rtl8723 wifi and bluetooth integrated module support 802.11b g n and bluetooth 4.0 dual mode(bw122), please be free to wholesale the quality products with our professional manufacturers and suppliers. The good after-sale service and fast delivery are available.

Related Products
Feedback: